KLIP-LOK CLASSIC® 700
Concealed fixed Roofing
Description
KLIP-LOK CLASSIC® 700 features improved rib strength for excellent spanning capacity. Visually, a strong rib makes a bold statement rising from flat pans with longitudinal fluting. Installed using a concealed fixed clip system permiting thermal expansion of long, straight runs, and because there are no piercings through the cladding; the long, straight lines of KLIP-LOK CLASSIC 700® remain crisp and clean. And no piercings also means superb weatherproof performance.
Wide cover concealed-fixed cladding with no exposed fasteners for weathertight roofs
Excellent water carrying capacity
Strong rib makes bold visual statement
Easy-to-install fixing clip means roof can be laid faster and more economically
Installed using the KLIP-LOK CLASSIC® 700 fixing clip system which is the fast and effective solution for weather resistant end and expansion joints.
Available Colours
Technical Specifications
BMT
0.42mm or 0.48mm
Â
Cover
700mm
Â
Lengths
Sheets are supplied custom cut.
Â
Tolerance
Length: +0mm, -15mmCover Width: + 4mm, – 4mm
Â
Make allowance for thermal expansion or contraction for long length roofs at sheeting ends.The equation ΔL = α x ΔT x L gives an indication of the sheeting extent or contraction (ΔL).α = 12 x 10-6 (coefficient of linear expansion for steel).ΔT = temperature change in °C.L = sheet length in mmMt=1.0 with the following assumptions made:
Â
Roofs:Cpi=+0.20, (Region A : Cpe=-0.65) (Region B : Cpe=-0.90),Walls:Cpi=0.20, Cpe=-0.65
Â
Material Specification
Next generation ZINCALUME® zinc/aluminium/magnesium alloy-coated steel complies with AS 1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass)
 COLORBOND® steel complying with AS/NZS 2728:2013 and the steel base is an aluminium/zinc/magnesium alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa). Minimum coating mass is AM100 (100g/m2)
 COLORBOND® Ultra steel designed for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 the steel base is an aluminium/zinc/magnesium alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa). Minimum coating mass is AM100 (100g/m2)
 COLORBOND® Stainless steel for severe and coastal environments. The painting complies with AS/NZS 2728:2013 and the steel base is stainless steel complying with AISI/ASTM Type 430; UNS No. S43000.
Â
Physical Properties
BMT | Material | kg/m | kg/m2 | m2/t |
0.42 | ZINC / ALUMINIUM COATED | 3.26 | 4.66 | 215 |
0.42 | PRE-PAINTED STEEL | 3.32 | 4.74 | 211 |
0.48 | ZINC / ALLUMINIUM COATED | 3.70 | 5.29 | 189 |
0.48 | PRE-PAINTED STEEL | 3.76 | 5.3 |
